Tag: Independent Freight International
Air freight transhipped via the Middle East could be disrupted after several countries decided to cut air, sea, land and diplomatic ties with Qatar.
Saudia Arabia, the UAE, Bahrain, Egypt, Yemen and Libya have all announced a break-off in ties with Qatar over its continued support of Muslim Brotherhood and its relationship with Iran.
All three major Gulf airlines will be affected – the most serious impact will be felt by Qatar Airways, which will be unable to fly to these countries, which have shut their airspace to it. The move is likely to result in longer flight times for Qatar Airways, as well as higher fuel bills.
Qatar Airways has published a short note on its website, but did not comment further. It said: “Qatar Airways has suspended all flights to the Kingdom of Saudi Arabia until 23:59 UTC on 5 June (2.59am, 6 June, Doha time).”
It advised customers with an existing cargo booking to call the nearest QR office.
While it only notes the suspension to Saudia Arabia, the UAE and other countries are expected to be added to the list.
Emirates, Etihad, Saudia, Gulf Airways, flyDubai and Air Arabia announced they would suspend all flights to and from Doha from 6 June, “as instructed by the UAE government”, noted Emirates. Etihad will upgrade its aircraft on the route to a 777 for the last few flights.
Etihad Cargo said in a statement: “All customers who have cargo booked on Etihad flights to and from Doha are being provided with alternative options and will be contacted directly regarding their specific requirements. Should you have any concerns about specific shipments, please contact your local Etihad Cargo office or alternatively our dedicated customer service team can be contacted 24 hours a day, seven days a week.
“All other Etihad Cargo flights, including to the rest of the Middle East, are operating as normal. Any further changes to the status of flight schedules to Doha will be communicated through the appropriate channels. Etihad Cargo regrets any inconvenience caused as a result of the suspension.”
Qatar is fairly reliant on both the UAE and Saudi Arabia for its imports. About half of its food is sourced in the Middle East, primarily from the UAE, which also accounts for most of its fruit and vegetables. The UAE accounts for some $2.76bn of its imports, and is Qatar’s fifth biggest import country. Much of the country’s poultry and dairy products come from Saudi Arabia.
Qatar’s only land border crossing with Saudi Arabia, at Abu Samra, sees about 800 lorries cross the border each day.
A new window film from Designtex takes its cues from science fiction.
Open offices are privacy nightmares, especially if you’re trying to hide sensitive data on screens. But since open offices aren’t going away any time soon, there’s Casper: a new product from the applied materials company Designtex that works like a cloaking device.
When applied to a glass wall or a window, Casper blacks out screens behind it. The transparent window film blocks light waves transmitted through LCD and LED screens. This makes them look like they’re turned off. Everything else in the room looks completely normal. While privacy screens have existed for laptops and individual monitors for quite sometime, Casper brings it to the architectural scale. It’s like a Romulan cloaking device come to life.
Courtesy : Fastcodesign Full article here
Bellow Press partners with Independent to bring North American Innovation to Clerkenwell Design Week
In many ways, CDW is more like the events surrounding iSaloni than a traditional furnishings show. In addition to furniture and furnishings — new products are launched here — visitors to CDW will find art installations, programming and a lot of parties.
Bellow Press, publishers of Business of Furniture and Workplaces magazine, and Independent Overseas Market Support are organizing the first ever North American Commercial Interiors Exhibit at Clerkenwell Design Week 2017. The exhibit will be curated by Bellow Press to show off the most innovative products North America has to offer the world.
“What struck me as I wandered around from permanent showrooms and temporary exhibitions was the absence of many of the most innovative North American commercial interiors companies.” says Rob Kirkbride, editor-in-chief at Bellow Press. “It is a shame, because designers I spoke to are very interested in specifying North American brands. The designs that are dreamt up in Clerkenwell spawn projects around the world, and the designers simply have no connection to the best from North America.”
The North American Exhibit will be as unique as the event itself. Those chosen to show at CDW 2017 will pick a single product to exhibit, one that focuses on innovation. For a low all inclusive cost, the product will be shipped to London from Independent’s Chicago hub, displayed on a professionally designed stand in a prime show location with other complimentary North American manufacturers, included in a pre-show CDW guide published in Business of Furniture and Workplaces magazines (along with a complimentary full page ad) and promoted heavily by show organizers. There will also be a North American themed party, think craft beer and BBQ.
Many small and mid-sized North American companies may have never done business overseas or even considered it. If needed, the organizers of the North American Exhibit have partner companies that can help to follow up on sales leads and projects in London and around the world – on a transactional basis.
So how do you get a product into the North American Commercial Interiors Exhibit? Reach out to Rob Kirkbride at firstname.lastname@example.org or Stewart Brown at email@example.com for any questions you might have about the event.
International firms want your products, but they have to know your brand to specify them.
Independent Freight is extremely pleased to announce our partnership with Overseas Markets LLC, founded to work together with North American manufacturers to take advantage of the opportunities being presented for their products in international markets.
As featured in this week’s edition of Business of Furniture, the company is focused on providing instant expertise in global trade to manufacturers in the Commercial Interiors Industry, without the manufacturer requiring any existing in-house resource or expertise.
Uniquely, Overseas Markets provides services on a transactional basis, working outside of traditional sales structures, allowing manufacturers to take advantage of international opportunities as they may arise without risk, complexity or commitment.
On behalf of the manufacturer, OM qualifies international inquiries, identifying requirements, processing proposals, handling documentation, shipping and securing payment – taking full responsibility for the transaction throughout without any cost to the manufacturer.
Overseas Markets has partnered with Independent Freight to provide the logistics expertise for their transactions, and will provide warehousing, customs and documentation consultancy and support, shipping, end user logistics, installation and project planning to all points worldwide.
We are extremely pleased to work in close partnership with OM in bringing North American products to international customers and wish them all best wishes on their activities.
Your toys and clothes are made far away. They’re put in big metal boxes that go on ships across the ocean. I work with my team to make sure there’s space for our customers’ boxes on those ships.
President and COO, INTTRA
I talk on the phone a lot to companies with trucks. I help them figure out the best trucks to use and the fastest way to (safely!) drive them so people like your parents can get the things they want on time, like a new TV, kitchen table, or PlayStation game for you.
VP, Global Solutions Consulting Descartes
Imagine using your iPad to talk to other people in the world who are buying your favorite toy. My job is to let you talk about your toy constantly and if you had a problem, ask them how to get it fixed.
Founding Chairman, Procurious
My job is to help people find, pick up, and move boxes.
President and CEO
PathGuide Technologies, Inc.
We move everything but people.
CEO, TPS Logistics
Imagine that all the yummy snack food you like to eat is being made and kept in different places all over the country. I call the people who make the snacks and ask when it is ready and then take it to the grocery store where you can buy it. I get the person who is driving with the snacks ready with all the right information. I then call and make sure someone will be at the grocery store ready to put the snacks on the shelves. I do all of this as fast as I can to make sure the snacks you want are always in the store where you’re shopping.
Logistics Consultant, Zipline Logistics
When the ice cream truck comes to your neighborhood, my job is to make sure that you and everyone else on your street get treats on time without having to wait too long. I map out the most efficient route and make sure that the truck is properly stocked and well refrigerated so that if you want an ice cream sandwich, and your friend wants a popsicle, we have enough of both when you reach the window and they are just as you expected (frozen, never thawed, not smashed).
Director of Lean Enterprise & Operations
Courtesy : Inbound Logistics
Until very recently, Hanjin Shipping was South Korea’s largest and one of the world’s top ten container carriers.
Hanjin is filing for court bankruptcy protection in about 10 countries, including Canada, Germany and the U.K. this week and later expand that to 43 jurisdictions to protect its ships and other assets from being seized by creditors, and the company is taking further legal action in countries beyond the U.S. for protection of its assets as it works to get a frozen supply chain moving again, with more than half its vessels stranded in ports world-wide and at sea.
Hanjin ships have been seized by creditors or turned away from ports, with terminals refusing to work with the company’s cargo for fear they won’t get paid. Analysts say Hanjin should seek to file for bankruptcy protection as quickly as possible in the jurisdictions it operates in to get ships back to port and containers unloaded.
Chinese ports and terminals that accepted Hanjin ships before the company announced bankruptcy proceedings are charging container-handling deposits of up to $1,800, say freight agents. Seven Hanjin ships remain stranded outside Chinese ports.
Hanjin is the largest shipping company in Korea, operating about 60 regular lines world-wide and transporting over 100 million tons of cargo a year, according to court papers. Its failure would be the largest in the history of the container-shipping industry, dwarfing all previous carrier bankruptcies.
Hanjin’s bankruptcy filing has sent spot shipping rates soaring by as much as 40% on routes from Asia to the Americas, according to analysts.
On the West Coast, terminal operators in Los Angeles and Long Beach are unloading all of the containers from the vessels. Containers that do not belong to Hanjin are processed according to normal procedures and terminals are holding onto import loads in Hanjin containers and will deliver the containers to truckers only if the beneficial cargo owners pay the terminal cargo-handling charges upfront. The terminals are not accepting Hanjin export loads and empty containers.
At the Northwest Seaport Alliance of Seattle and Tacoma there were no Hanjin vessels in port on Friday, according to spokesperson Tara Mattina. The Hanjin Scarlet is due to arrive at Terminal 46 in Seattle on Saturday, although the schedule may not hold up. As of Friday, the was anchored outside Prince Rupert, British Columbia, where its entry was refused, she said.
Terminal 46 is now accepting import containers, but is not accepting export loads and empties. Olympic Container Terminal in Tacoma is not accepting any Hanjin deliveries for now and the Husky Terminal is not accepting exports or empties, but is unloading imports and is encouraging truckers to bring their own chassis, Mattina said.
In Vancouver, Global Container Terminal said it will no longer receive Hanjin ships. One Hanjin ship is at the port waiting to be moved on.
On the East Coast, the largest terminal in the Port of New York and New Jersey, Maher Terminals, has made no statement on if, or how much, shippers must pay to get Hanjin containers. However, the terminal has told customers that Hanjin import deliveries must be pre-paid and that Hanjin exports won’t be accepted. One motor carrier advised he was required to pay $395.20 per container to cover stevedoring charges before he could remove a Hanjin box from the terminal.
Maher is the only New York-New Jersey terminal that receives Hanjin ships, and APM Terminals, Port Newark Container Terminal, and Global Container Terminals didn’t disclose how they are handling Hanjin containers.
Down the coast in Baltimore, Ports America Chesapeake, which operates the Seagirt Terminal in Baltimore didn’t disclose how it’s handling already received Hanjin containers. The terminal did say it will not accept any inbound Hanjin cargo, and they will continue receiving but not delivering Hanjin empty containers. The Maryland Port Administration said a barge loaded with Hanjin containers is sitting in the port.
At the Port of Virginia, Hanjin export containers may be picked-up at the terminals by the original shipper only with authorization from Hanjin. In these occurrences, all terminal service charges shall be waived and the shipper will be responsible for all associated chassis charges and fees. All import containers on terminal by Tuesday with the appropriate documentation will be available per normal policy. Starting Wednesday the charge to release Hanjin import containers will be $325, but all demurrage charges will be waived and shippers must have authorization from Hanjin.
At the Port of Wilmington, North Carolina, a Hanjin ship, Seaspan Efficiency, left late Tuesday and cargo from the vessel is being stored at the port. “North Carolina Ports will deliver all import loads and receive back all empties (originally discharged and currently at the Port of Wilmington), including Hanjin Shipping containers,” said a spokesperson.
Further south, the South Carolina Ports Authority has waived the non-vessel delivery fee for export loads out-gated and all import loads discharged on or after September 1 will be placed on hold until such time as all SCPA charges are settled. The South Carolina Ports Authority will collect all port and throughput charges totaling $350 per container from the BCO/responsible party with authorization required from Hanjin. This process will be further refined, but payment is required prior to manual release of hold and outgate.
The Georgia Ports Authority, which oversees the second-largest port on the East Coast, Savannah, wasn’t available to comment, nor was Port Miami. The Port of Jacksonville said it does not have any calls from Hanjin or other CKYHE Alliance members.
Along the Gulf Coast, Houston is holding containers until they receive $100 to cover the Port of Houston Authority’s terminal throughput charges, which are separate from stevedoring costs. The port authority is considering whether to also require guarantees or payment for stevedoring bills for Hanjin boxes that will be discharged from a China Cosco Shipping vessel expected in next week.
Mobile only had three Hanjin containers at the terminal so the operator there, APMT, is checking with the individual customers to see how they would like to proceed. New Orleans, like Jacksonville, has no Hanjin or other CKYHE calls.
Hanjin’s unprecedented bankruptcy will have a significant impact on the cost and effectiveness of all container shipping routes worldwide, so please contact your forwarder to confirm how this may affect you !
Courtesy : WSJ, JOC, CBS, BBC, Reuters
What is the SOLAS Container Weight Rule?
In brief, the SOLAS Rules from the IMO state that, effective July 1 2016, ocean freight carriers worldwide will be prohibited from loading a container aboard vessels in 162 countries worldwide unless the shipper has provided the carrier with the verified gross mass (VGM) of the container. The VGM must be provided to the carrier either digitally or signed and noted on the bill of lading prior to vessel loading.
How is the new SOLAS Rule being implemented for US export shipments with effect from July 1 2016?
With a few exceptions, as it stands today the standard rules as published by the shipping lines require their receipt from the shipper of a certified VGM prior to the container arriving in to port for onward shipment, otherwise cost may be incurred for delay and/or port handling. Currently the VGM should be determined using either Method 1 or 2 as per our previous message on the subject and remains the responsibility of the shipper as per the B/L.
What, if anything, has changed ?
With just days before the SOLAS container weight rule takes effect, ports, marine terminals and container lines are coming closer to creating a system that will use pre-existing weighing processes to alleviate the burden on U.S. exporters. Regulators have given the go-ahead that allows a group of six East and Gulf coast ports and 19 ocean carriers to develop a common strategy for using existing weighing processes that satisfy federal regulations to meet the new international rule, and with multiple shipping lines backing the approach and the head of the Federal Maritime Commission urging the industry to embrace the same path, more announcements from terminals and carriers are expected before the rule takes effect on Friday.
In fact, a number of shipping lines have today confirmed that they will receive the certified scaled weight electronically from the terminal, and this will be used as the VGM.
As a shipper, do I still need to ensure that a VGM is correctly submitted on my behalf ?
Yes, until we have clear confirmation otherwise – the new rule’s rollout is just days away, but guidance from operating ports, carriers, terminal operators and nation states has been variable and prone to change with little or no notice.
What happens next ?
We believe that the process, standards and responsibilities for the implementation for the VGM rule under SOLAS rule will become less arduous to the commercial shipper over the next few days, weeks and months but would recommend close compliance with current methodology in the meantime until such time as any new regulations are finalised.We will continue to keep you updated on developments, and please be assured that we will work with everyone on a case by case basis to ensure that shipments are in compliance with the new rulings, and avoid unnecessary cost or delay on export.
In the meantime, please do not hesitate to let us know if we can help in any way !
A big thanks to the exhibitors, attendees and organisers of 2016 workspace at INDEX for a fabulous show in Dubai 23-26 May 2016. Some images below !
What is the SOLAS Container Weight Rule?
The International Maritime Organization (IMO) has amended the Safety of Life at Sea (SOLAS) convention in the wake of several maritime safety incidents between 2007 and 2015 believed to be linked to inaccurately-reported container weights.
Under the new rule, effective July 1, 2016, ocean freight carriers worldwide will be prohibited from loading a container aboard vessels in 162 countries worldwide unless the Shipper (as identified by the Shipping Line B/L) has provided the carrier with the verified gross mass (VGM) of the container. The VGM must be provided to the carrier either digitally or signed and noted on the bill of lading prior to vessel loading.
How is the New SOLAS Rule Being Implemented?
Two methods have been outlined for determining the VGM of a container:
Method 1: Weighing the loaded container
Method 2: Adding the verified weight of the contents of each container to the container tare weight.
Though enforcement of the new rule will go into effect on July 1, questions that stakeholders around the world are struggling to address include how container weights should be determined, be reported to carriers, how will the rule be enforced, and what is the implication of non-compliance.
At present no single global standard exists for the above, and it appears unlikely that such a standard will be adopted prior to July 1. Even within the United States, there is no uniform standard for how to obtain container weights and communicate them to carriers.
There is also uncertainty over how far in advance VGMs will need to be submitted to carriers. It appears that carrier cutoff times for VGMs will vary from vessel cutoff times – with VGM deadline dates occurring earlier than general cutoffs, depending on the carrier.
As a general rule, carriers are requiring VGM receipt prior to containers being received at port for export. Carriers are further advising that if the VGM is not received by their deadline, costs will be incurred for the account of cargo which may include port weighing charges, additional terminal handling, container roll charges and demurrage.
To further complicate implementation, the IMO did not specify a uniform margin of error for declared container weight vs. actual weight. As a result, each of the 162 effected countries will be able to define their own margin of error and terms for enforcement. Below is a snapshot of how different countries are approaching enforcement:
- Argentina – Weight must be accurate within 5%.
- Brazil – The countries container terminals have an existing policy in place of weighing containers upon receipt at port. The terminals plan on charging the carriers 40-60 reais/container for VGM input
- Canada – Spot checks will be performed on container weight. Violators will be fined ranging from C$600-C$1,200.
- China – Weight should be within 5% or 1 Ton.
- India – Weight must be exact within 200 kg.
- Japan – Fine of up to USD 2,600 per violation if there is a discrepancy of more than 5% in container weight.
- Russia – Terminals such as Container Terminal Saint Petersburg and NUTEP Novorossiysk will allow container weighing at the port, though it is unclear whether the necessary infrastructure will be in place by July 1.
- South Africa – Auditing, inspections to ensure compliance. Violators can be imprisoned for up to one year or fined.
- United Kingdom – Shippers planning to weigh the contents and packaging of a container as per Method 2 will have to become certified by the U.K. Maritime and Coast Guard Agency, and pay a fee for their application. Shippers will need to fill out a checklist and provide documented evidence in order to receive MCGA approval, and once certified, will be added to a publicly available database tracking exporters. Shippers must have documented evidence of a process control system such as an ISO 9000 certification, the weighing method used, detailed information of weighing equipment that will be used, equipment maintenance and calibration processes, record retention, training in equipment use and procedures for dealing with faulty equipment. Failure to adhere to the new law (weight must be accurate within 5%) will constitute a criminal offense punishable by imprisonment or significant fine.
- UAE – DP World has advised they will weigh each container at the terminal and provide the VGM for a fee per container.
- United States – Coast Guard is leaving enforcement of the rule up to interpretation of, and enforcement by, the shipping industry. Congress refuses to clarify official U.S. Government stance. Speculation of possible involvement by Federal Maritime Commission (FMC) to set clearer guidelines.
Summary – US exports
As far as shipments from the US are concerned, the practical application of the new regulations, whilst still in the process of being formalised, can currently be summarised as follows :
- The shipper (as identified by the Shipping Line’s B/L) is responsible to declare the VGM to the Carrier.
- The VGM is currently expected to be an electronic declaration to the carrier.
- The VGM should be transmitted by the shipper’s authorised forwarder or the NVOCC (if not a direct shipment), based on the verified container contents information confirmed by the shipper, including shipment weight (product and packaging), loading/dunnage materials, added to the tare weight of the container.
- The shipper should have a method in place to determine the actual weight of the contents of the container. Methods could include :
- weighing the contents prior to loading,or
- using published manufacturer’s weights if product is shipped in manufacturer packaging and the weight is printed on that packaging, or
- for manufacturers, using standardised shipment weights where weights of samples have been separately verified, or
- any combination of the above.
- The shipping lines will generally require receipt of the VGM information prior to the container arriving in to port for onward shipment, otherwise cost will be incurred for delay / port handling – which cost will not be inconsequential.
- In the case of a less than container load shipment, the responsibility for verifying the detail of, and transmission of, the VGM remains with the NVOCC/consolidator/master loader.
We will continue to keep you updated on developments, and please be assured that we will work with each of our customers on a case by case basis to ensure that shipments are in compliance with the new rulings, and do not incur unnecessary cost or delay on export.
Courtesy : JOC, American Shipper, CargoSmart, Cargo Business, IMO, World Shipping Council
With overall market statistics and named project information, the report once again provides unique detail on the commercial, education and healthcare fit out opportunities available to North American companies in the Middle East region.
An extract from the overall conclusion of the Report confirms as follows :
The GCC’s fit out industry has its hands full heading into 2016 due to heightened construction activity, and the completion of structural works on large-scale. Fit out operations have evolved in line with industry changes, and modern fit out designs and practices are transitioning to suit international standards. This evolution can be attributed to the rapid globalisation ambitions of local GCC markets such as the UAE and Qatar.
As sustainability has become a major issue, the fit out industry has experienced increased pressure to implement environmentally-responsible practices.
Despite the slump in oil prices, the GCC building construction and interiors market is clearly set for a sustained upward stint over the next few years.
– The GCC interiors and fit out spend in the Commercial Sector is expected to increase from US$ 1,150 million in 2015 to US$ 1,168 million in 2016.
– All GCC countries are likely to register an upward trend in 2016 in terms of interior and fit outs spend except for Saudi Arabia.
– The interiors and fit out spend in the UAE Commercial Sector alone is likely to increase from US$ 328 million in 2015 to US$ 350 million in 2016.